9/15/2023 0 Comments Floppy disk formatIn DOS, the first floppy drive is A:, the second is B:, and the first hard disk drive is C: (if present).įORMAT a: Formatting puts crucial information (see FAT Explained) onto the disk so that the host operating system can read and understand it. In order to prepare the floppy disk to be readable on a PC, it must be formatted. This is because there are different encoding methods that were used by the various computers available at the time - Apple used a different encoding method to Commodore (GCR), and both were different to what the IBM PC and its compatibles used (MFM). Most floppy disks come out of the box 'unformatted'. Remember, when you format a disk, any existing information contained on the disk is lost.All flavours of DOS (MS-DOS, PC-DOS, DR-DOS, etc) have all had the external command FORMAT since version 1.0. Give the name of the "drive letter" as an argument of the disk to be formatted. To format a floppy disk for DOS, writing an empty MS-DOS filesystem to the disk in the process, use mformat, which is in the mtools package: aptitude install mtools Then format the floppy: mkfs.msdos /dev/fd0 mke2fs /dev/fd0įirst, you will need to install the dosfstools package: aptitude install dosfstools If you want a blank Linux formatted floppy, then you can use the command mke2fs. If you are using the second floppy drive, then just replace /dev/fd0 with /dev/fd1 in these instructions. ![]() The first floppy drive in Linux is /dev/fd0 and the second one is /dev/fd1. In Linux, you can format a floppy disk as a DOS disk or a Linux disk.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |